Related Colors

Application Tips

• Shake the can well for 1 minute after hearing the mixing ball rattle.
• Align the spray opening with the black dot on the can rim.
• Spray in a well-ventilated area.
• Make sure surface is clean and dry.
• Ultra-fine spray allows for versatile application techniques — such as color misting, blending, creative effects, or achieving a dripless, even finish.
• 1 coat creates a soft, translucent wash of color.
• 2–3 light coats enrich the color and provide full surface coverage.
• For fresh flowers, spray from a distance of 15–18 in / 38–45 cm. Best results occur when blossoms are in good condition and at room temperature.
• For hard surfaces, spray from a distance of 12–15 in / 30–38 cm using steady, consistent strokes parallel to the surface. Start at the base and move upward, rotating the object Slightly overlap each stroke to prevent uneven coverage and ensure a smooth, even finish. Begin and end each stroke off of the object.
• For Styrofoam™ brand foam, spray 15–18 in / 38–45 cm away using light, even coats. Allow to dry between coats and build up coverage gradually. Avoid over-wetting the surface to prevent melting.
• For vinyl surfaces, apply a basecoat of Super Surface Sealer to ensure compatibility with spray color.
• On prefinished or unknown coatings, test spray a small, hidden area first to confirm adhesion and desired results.
• Recommended for indoor projects. Colors are not UV resistant and may fade if regularly exposed to direct sunlight.