Share This

Pacific Blue 690

New Color


Indoor, Satin Finish
Fast Drying

safe on fresh flowers and Styrofoam™ brand foam

Learn More about our COLORTOOL® Spray Where to Buy

Why you will love working with our COLORTOOL® Spray

  • Dry Time:5 minutes
  • Net Weight:12 OZ (340 g)
  • Coverage:Influenced by usage and desired opacity. Up to 16 sq ft - single coat / 6-8 sq ft - full opacity
  • Application Conditions:Use in a room temperature (70 °F), low humidity and a well-ventilated area
  • Recoat Window:Some paints require its application to be within (so many) minutes or after (so many) hours. Design Master sprays can be reapplied at any time.
  • Cleanup:

    Mess Master, lacquer thinner or acetone on non-perishables

  • SPECS:Pigmented, solvent-based, lacquer type spray

  • Ultra-fine spray provides for application options. Color misting, blending, creative techniques or dripless, even finishes.
  • 1 coat applications appear as a wash of color and slightly translucent.
  • 2-3 light coats enrich the color and provide complete coverage of the surface.
  • To achieve the smoothest finish, apply spray in sweeping, even and parallel strokes.  Start at the base of the item spraying all around its circumference.  Then move up the item, keeping a wet edge as you cover any overspray.
  • On fresh flowers ensure a safe spraying distance of at least 18 inches. Best if blossoms are of good quality and at room temperature.
  • On Styrofoam™ brand foam ensure a safe spraying distance of at least 18 inches. Apply light even coats of color. Be sure to let dry between coats. Build up coverage in steps. (Remember, it dries quick so won’t take too long.) Heavy coats or not allowing drying between coats will leave the surface too wet for too long and could cause the foam to melt.
  • On glass a basecoat of Clear Finish Gloss will improve adhesion.
  • Some plastic surfaces will require Primer to ensure adhesion. Test spray to determine.
  • On vinyl or latex coated surfaces apply a basecoat of Super Surface Sealer to insure compatibility between the surface and spray color.
  • Some prefinished surfaces can be difficult to determine coating type. Test spray an inconspicuous area to ensure compatibility and desired results.
  • Ideal for indoor projects. (The finish is durable for outdoor use but pigments are not UV resistant. Some colors by nature will hold their color better than others.)